Gas Burning Lime Kiln

Specifications:

Gas burning lime rotary kiln is a kind of new emerging lime production technology. It is well known that lime is made from limestone. The main ingredients of limestone is CaCO3. After calcining, lime will become calcium oxide. Limestone can be decomposed into lime as long as a certain amount heat is provided.

Application Range:Building material, metallurgy, chemical industry, electrical power and etc.
Applicable Materials:cement, Lime,Refractories, Metakaolin, Titanium dioxide, Alumina, Vermiculite, Iron ore pellets.
rotary kiln raw material    rotary kiln raw material    rotary kiln raw material    rotary kiln raw material    rotary kiln raw material    rotary kiln raw material

Advantages

1.     Advanced burning mechanism and less heat loss
It adopts fully sealed calcining mechanism. Multi-layer refractory materials are adopted in internal kiln. The design lifespan is more than 5 years. Meanwhile, in order to use energy effectively, heat exchange is adopted by upper and lower kiln part, which mostly reduces thermal loss.
2.      Advanced technology, high efficiency and good quality of lime
The machine designed by our company uses vertical preheater with advanced structure and lower pressure loss. These advantages can not only improve production efficiency. In addition, lime produced by this machine holds good quality and high activities. It is a kind of ideal energy-saving lime kiln equipment.
3.     Advanced structure and high investment profits
The rotary kiln structure should be made according to flame length and output capacity. It is testified by practice that gas burning lime rotary kiln should be bigger instead of smaller. One should make sure good air permeability. In fact, the distributing device is simpler than that of coal kiln. The proportion of fuel gas and air is supposed to be rational. The working principle of this machine is very easy.

Working Principle

Technical Parameters

 
Specifications (m)
Dimension Power (kw) Total weight (t) Notes
Diameter (m) Length (m) Inclination (%) Output (t/h) Rotary speed (r/min)
Φ2.5×40 2.5 40 3.5 180 0.44-2.44 55 149.61 With vertical preheater
Φ2.5×50 2.5 50 3 200 0.62-1.86 55 187.37 ----
Φ2.5×54 2.5 54 3.5 204 0.48-1.45 55 196.29 ----
Φ2.7×42 2.7 42 3.5 320 0.10-1.52 55 198.5 ----
Φ2.8×44 2.8 44 3.5 400 0.437-2.18 55 201.58 Decomposition outside the kiln
Φ3.0×45 3 45 3.5 500 0.5-2.47 75 210.94 ---- 
Φ3.0×48 3 48 3.5 700 0.6-3.48 100 237 Decomposition outside the kiln
Φ3.0×60 3 60 3.5 300 0.3-2 100 310 Bauxite calcining kiln
Φ3.2×50 3.2 50 4 1000 0.6-3 125 278 Decomposition outside the kiln
Φ3.3×52 3.3 52 3.5 1300 0.266-2.66 125 283 preheat decomposition
Φ3.5×54 3.5 54 3.5 1500 0.55-3.4 220 363 preheat decomposition
Φ3.6×70 3.6 70 3.5 1800 0.25-1.25 125 419 Residual heat power
Φ4.0×56 4 56 4 2300 0.41-4.07 315 456 preheat decomposition
Φ4.0×60 4 60 3.5 2500 0.396-3.96 315 510 preheat decomposition
Φ4.2×60 4.2 60 4 2750 0.4-3.98 375 633 preheat decomposition
Φ4.3×60 4.3 60 3.5 3200 0.396-3.96 375 583 preheat decomposition
Φ4.5×66 4.5 66 3.5 4000 0.41-4.1 560 710.4 preheat decomposition
Φ4.7×74 4.7 74 4 4500 0.35-4 630 849 preheat decomposition
Φ4.8×74 4.8 74 4 5000 0.396-3.96 630 899 preheat decomposition
Φ5.0×74 5 74 4 6000 0.35-4 710 944 preheat decomposition
Φ5.6×87 5.6 87 4 8000 Max4.23 800 1265 preheat decomposition
Φ6.0×95 6 95 4 10000 Max5 950×2 1659 preheat decomposition

Applicable Materials

rotary kiln raw material       rotary kiln raw material       rotary kiln raw material       rotary kiln raw material             rotary kiln raw material

Core Equipment